12V 35w Transformer Power Supply Driver Led Light Non-Waterproof 35W DC Non-Waterproof LED Transformer Power Supply Driver, LED Power Supply Driver LED Transformer 100-240V to 12V DC Output
Features:
1. CE ROHS Metal shell 12v ac dc power supply.
2. The product consists of indoor type and outdoor type.
3. Convenient wiring.
4. Abnormality protection function : short circuit ,over load ,over voltage,over temp .
5. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.
6. Quality assurance: 2 years warranty.
7. High efficiency .
8. International AC input .
9. Built-in EMI fiter .
10. 100% full load burn-in test .
| MODEL | 5V 35W | 12V 35W | 15V 35W | 24V 35W |
| OUTPUT | DC VOLTAGE | 5V | 12V | 15V | 24V |
| RATED CURRENT | 5A | 3A | 2.4A | 1.5A |
| CURRENT RANGE | 0~5A | 0~3A | 0~2.4A | 0~1.5A |
| RATED POWER | 35W | 35W | 35W | 35W |
| RIPPLE$NOISE(max.)NOTE2 | 80mV | 100mV | 100mV | 150mV |
| VOLTAGE TOLERANCENOTE3 | ±10% | ±10% | ±10% | ±10% |
| SETUP.RISE TIME | 200ms 100ms |
| HOLD UP TIME(Typ.) | 30ms |
| INPUT | VOLTAGE RANGE | 85-264VAC |
| FREQUENCY RANGE | 47~63HZ |
| POWER FACTOR(Typ.) | PF>0.6/220VAC |
| EFFICIENCY(Typ.) | 76% | 78% | 80% | 80% |
| AC CURRENT(Typ.) | 0.9A/110V,0.45A/230V |
| INRUSH CURRENT(Typ.) | COLD-START CURRENT36A/230VAC |
| PROTECTION | Short circuit | Protection Type:recovers automatically after fault condition is removed |
| Overlaod | 105%~135% hiccup mode,auto-recovery |
| ENVIRONMENT | WORKING TEMP. | -20°C~+60°C |
| WORKING HUMIDITY | 20%~90%RH |
| STORAGE TEMP.HUMIDITY | –40°C~85°C/10%~95%RH |
| SAFETY&EMC | SAEFTY STANDARDS | CE ROHS |
| WITHSAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| EMC Test Standards | EN55015:2006;EN61547:1995+A1:2000;EN61000-3-2:2006; |
| EN61000-3-3:1995+A2:2005;EN61347-1:2001;EN61347-2-13:2006 |
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation |
