CE RoHS constant voltage single output switch mode power supply 5v 12v 24v 200W power supply
Specifications
PS metal 200w 12v ac dc switch mode power supply
International AC input
100% full load burn-in test
Built-in EMI filter
Features:
1. PS 200w 12v ac dc switch mode power supply.
2. The product consists of indoor type and outdoor type.
3. Convenient wiring.
4. Abnormality protection function : short circuit ,over load ,over voltage,over temp .
5. Various types for your choice:Constant Voltage Power supply and Constant Current Power supply.
6. Quality assurance: 2 years warranty.
7. High efficiency .
8. International AC input .
9. Built-in EMI fiter .
10.100% full load burn-in test .
| PS200-H1V12 |
| MODEL | 5V200W | 12V 200W | 24V200W | 48V 200W |
| OUTPUT | DC VOLTAGE | 5V | 12V | 24V | 48V |
| RATED CURRENT | 40A | 16.5A | 8.3A | 4.2A |
| CURRENT RANGE | 0~40A | 0~16.5A | 0~8.3A | 0~4.2A |
| RATED POWER | 200W | 200W | 200W | 200W |
| RIPPLE& NOISE (MAX.)NOTE2 | 120mV | 150mV | 150mV | 200mV |
| VOLTAGE TOLERANCENOTE3 | ±2% | ±1% | ±1% | ±1% |
| SETUP , RISE TIME | 200ms/220VAC 100ms/220VAC |
| HOLD UP TIME(Typ.) | 20ms/220VAC |
| INPUT | VOLTAGE RANGE | 85~132VAC/170~264VAC |
| FREQUENCY RANGE | 47~63Hz |
| POWER FACTOR(Typ.) | PF>0.6/220VAC |
| EFFICIENCY(Typ.) | 81% | 84% | 85% | 86% |
| AC CURRENT(Typ.) | 4.5A/115VAC 2.5A/230VAC |
| INRUSH CURRENT(Typ.) | COLD START 25A/115VAC 50A/230VAC |
| PROTECTION | Short circuit | Protection type : recovers automatically after fault condition is removed |
| Over load | 105~135% hiccup mode , auto-recovery |
| Over voltage | 115%~135% Cut off the output , auto-recovery |
| Over temperature | Rectifier ≥105°C cut off the output , auto-recovery |
| ENVIRONMENT | WORKING TEMP | -20°C~ +60°C |
| WORKING HUMIDITY | 20%~90%RH |
| STORAGE TEMP , HUMIDITY | -40°C~+85°C,10%-90%RH |
| SAFETY &EMC | SAFETY STANDARDS | CE,ROHS |
| WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
| EMC Test Standards | EN55015:2006;EN61547:1995+A1:2000;EN61000-3-2:2006: |
| EN61000-3-3:1995+A2:2005;EN61347-1:2001;EN61347-2-13:2006 |
| NOTE | 1.All paraments NOT specially mentioned are measured at 220VAC input ,reted load and 25°C of ambient temperature
2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1 uf & 10 uf parallel capacitpr .
3.Tolerance : includes set up tolerance , line regulation and load regulation . |
