LED SILICONE NEON FLEX LED Neon Lights 12V Input Decorative Waterproof Flexible Led Neon Light
Silicon Extrusion Series LED Neon Flex Strip Light
Silicon Extrusion Series is the perfect replacement for tranditional glass neon. Durable, bright, easy to use ,can be cuttable and reconncted by the connector, Silicon Extrusion LED neon Series is a LED product similar to a rope light but made for commercial,architectural lighting and signage applications.Excellent flexibility to shape optionally.Uniform and soft luminance, no light spot.
Advantages
1.Silicone extrusion in high UV-resistant
2.V-2 flame retardance
3.Max run length in 20m by two ends powered
4.12V DC with current regulator
5.IP68 tested
6.Minimum bending diameter in 30mm [1.18in]
7. conventional 5 meters a roll, light angle 120 degrees.
8. can be bent freely, can be arbitrarily fixed on the concave and convex surface, easy to install!
Ultra Thin 5*12mm IP68 Waterproof 12V Silicone SMD2835 LED Neon Flex Light 120LEDs/m
| LED Brand | Hongli/Everlight LED |
| Chip Brand | Epistar/Sanan Chip |
| Cover Material | Silicone which will not go yellow |
| Input Voltage | 12V DC |
| LED Type | SMD2835 |
| LED QTY | 120 LEDs/Meter |
| Power | 10W/M |
| Light Color | White/Warm White/Red/Green/Blue/Yellow |
| Neon Light Size | 5*12mm 5m/roll or 10m/roll |
| IP Grade | IP68 |
| Working temperature | -40~+50 °C |
| Warranty | 3 Years |
| Certificate | CE RoHS UL |
| Application | Indoor Lighting; Outdoor Lighting; Commercial Lighting; Landscape Lighting; Decoration Lighting; Building Outlet Decoration; Advertising Lighting; Project Lighting; |
NOTE:
We strongly recommend the use of a surge protector with our rope lights.
All connections must be sealed with a waterproof sealant or silicone and weatherproof heat tape kit when installing rope lights outdoors.
To avoid damaging your lighting and the possible fire risk, completely unspool lights before connecting to power.
Prior to cutting or modifying your neon LED rope lights, we recommend testing the light output and color for your project. Failure to test before altering a product may result in the inability to return or exchange your purchase.
Installation
-Note that the output DC voltage of the switching power supply should be consistent with the rated voltage of the LED neon flex. Do not light the LED neon flex directly with the AC 220V.
-Ensure that the LED neon flex is firmly and reliably installed. It is best to use a special 3M strong adhesive to fix it.
-please cut at the scissors mark, such as outdoor installation, must handle the middle wiring waterproof measures.
-Do not bend the LED neon flex excessively. The minimum angle must not be less than 10 degrees.
