Silicone LED Neon Rope Light -12 Volt Dot-Free Light LED Silicone Neon Flex12V DC Silicone Ip67
Silicon Extrusion Series LED Neon Flex Strip Light
Silicone LED Neon Rope Light are the latest in LED linear lighting. Incorporating new and advanced LED technologies into the perfect flexible linear lighting solution, 12 Volt LED Strip Lights are the best choice for your lighting project. SMD LED Neon strip emulates traditional glass neon but at a fraction of the cost and energy consumption. Neon strip's small size and high degree of flexibility along with it's near indestructible design allows you to use it in the most demanding of locations..
Advantages
1.Silicone extrusion in high UV-resistant
2.V-2 flame retardance
3.Max run length in 20m by two ends powered
4.12V DC with current regulator
5.IP68 tested
6.Minimum bending diameter in 30mm [1.18in]
7. conventional 5 meters a roll, light angle 120 degrees.
8. can be bent freely, can be arbitrarily fixed on the concave and convex surface, easy to install!
Ultra Thin 5*12mm IP68 Waterproof 12V Silicone SMD2835 LED Neon Flex Light 120LEDs/m
| LED Brand | Hongli/Everlight LED |
| Chip Brand | Epistar/Sanan Chip |
| Cover Material | Silicone which will not go yellow |
| Input Voltage | 12V DC |
| LED Type | SMD2835 |
| LED QTY | 120 LEDs/Meter |
| Power | 10W/M |
| Light Color | White/Warm White/Red/Green/Blue/Yellow |
| Neon Light Size | 5*12mm 5m/roll or 10m/roll |
| IP Grade | IP68 |
| Working temperature | -40~+50 °C |
| Warranty | 3 Years |
| Certificate | CE RoHS UL |
| Application | Indoor Lighting; Outdoor Lighting; Commercial Lighting; Landscape Lighting; Decoration Lighting; Building Outlet Decoration; Advertising Lighting; Project Lighting; |
NOTE:
We strongly recommend the use of a surge protector with our rope lights.
All connections must be sealed with a waterproof sealant or silicone and weatherproof heat tape kit when installing rope lights outdoors.
To avoid damaging your lighting and the possible fire risk, completely unspool lights before connecting to power.
Prior to cutting or modifying your neon LED rope lights, we recommend testing the light output and color for your project. Failure to test before altering a product may result in the inability to return or exchange your purchase.
Installation
-Note that the output DC voltage of the switching power supply should be consistent with the rated voltage of the LED neon flex. Do not light the LED neon flex directly with the AC 220V.
-Ensure that the LED neon flex is firmly and reliably installed. It is best to use a special 3M strong adhesive to fix it.
-please cut at the scissors mark, such as outdoor installation, must handle the middle wiring waterproof measures.
-Do not bend the LED neon flex excessively. The minimum angle must not be less than 10 degrees.
